Notifiche
Cancella tutti

Surriscaldamento indesiderato in RM

3 Post
1 Utenti
0 Reactions
2 Visualizzazioni
(@Utente 0002)
Registrato: 1 secondo fa
Post: 0
  [#2947]

Pensando agli effetti di surriscaldamento che si possono verificare sulle parti anatomiche del Paziente, ho trovato una spiegazione interessante di Tobias Gilk di cui vi incollo la traduzione automatica fatta come google translate:

 

 

Riscaldamento in MR realtà non è * una * cosa ... è tre cose. Vi è il riscaldamento che è il risultato di resistenza locale al flusso di corrente indotta in circuiti virtuali grosso calibro. Il riscaldamento è dovuto agli effetti RF focali (prossimità o contatto con un elemento di trasmissione bobina RF). Entrambe queste preoccupazioni di riscaldamento presenti, senza alcun metallo mantenuto (anche se in metallo trattenuto * potrebbe * rischi aumentano per entrambi). 
 
Il terzo - quello che si sta chiedendo - metallo viene mantenuta che agisce come un'antenna RF, raccoglie l'energia RF e, non avendo altro da fare con essa, converte in quantità significative di calore. 
 
La più grave rischio di riscaldamento si verifica quando un conduttore elettrico è 1/4 della lunghezza d'onda RF. Tale lunghezza critica è (questo è dalla memoria, persone, quindi se qualcuno ha un link a un riferimento, che sarebbe il benvenuto) circa 25 cm alla 1.5T e 12,5 cm in 3.0T. 
 
Come si ottiene più lontano dalla queste lunghezze critiche, il rischio di 'azione antenne' RF scende. 
 
Così, nella radiografia che abbiamo visto, nessuno dei corpi estranei sembrava essere su un cm in qualsiasi dimensione. A 3.0T questo significa che quegli oggetti erano più di 10 volte troppo piccolo per essere nel riscaldamento 'sweet spot'. 
 
Non è che un conduttore deve essere proprio la 'lunghezza magia' a sperimentare il riscaldamento, quindi se fossimo nel quartiere di 10 o 15 cm (a 3.0T), non ci sarebbe motivo giustificabile per cautela circa procedere in queste condizioni. 
 
 
Il più semplice dei due è RF focale, quindi inizieremo lì. Se si sta utilizzando la bobina corpo per trasmettere (trasmissione dalla parete del vostro foro), ci sono RF emettitori tutto intorno al paziente, pompaggio energia RF in un modello che è stato progettato per essere abbastanza uniforme all'interno del volume di imaging per il tuo magnete. Come ci si avvicina alle pareti del foro (all'interno di un cm per la maggior parte dei produttori), c'è il rischio che si potrebbe essere proprio sulla cima di uno dei trasmettitori RF. 
 
Pensate un calore lampada di mantenimento piatti di preparati cibi caldi come analogia. Dove le placche si siedono a 18 centimetri sotto la fila di luci, il calore viene distribuito uniformemente. Se si dovesse mettere una piastra da 1 pollice sotto una lampada di calore, mentre tutti gli altri sono rimasti a 18-pollici sotto il resto della riga, è intuitivamente sa che ci sarebbe una differenza piuttosto significativa in riscaldamento. 
 
Se si guarda attraverso i rapporti della FDA di ustioni MRI-correlati, vedrete un sacco di segnalazioni di gomiti e spalle. Perché questi? perché sono necessariamente le parti del corpo più vicino alla parete del foro ... soprattutto se abbiamo spostato il paziente al lato all'immagine spalla controlaterale, per esempio. 
 
L'altro meccanismo di riscaldamento è un po 'più strano ... il loop corpo grosso calibro. Questo effetto di riscaldamento non è da RF, ma piuttosto dal gradiente. 
 
Un campo magnetico oscillante induce una corrente in un conduttore elettrico (legge di Faraday). Quali sono esseri umani per lo più a base di? Acqua. L'acqua è un dannatamente buon conduttore di elettricità. 
 
Quando abbiamo messo un paziente nella MR e iniziare il lavaggio loro in un campo magnetico oscillante (gradiente di campo magnetico variabile nel tempo), si induce correnti elettriche nel loro corpo. L'intensità della corrente dipende, in parte, da quanto grande di un 'pista' la corrente può trovare. Torsi sono grandi per questo, ma sono solo un unico grande volume contigua di materiale elettricamente conduttivo. Al fine di ottenere una bruciatura abbiamo bisogno di un punto di resistenza elettrica. 
 
Se avete mai visto 'baciare' punti di arrossamento su un paziente, si può avere identificato il punto resistivo di un loop di corrente. Questi possono essere trovati talvolta pollice per coscia per un paziente con il braccio dalla loro parte, se il paziente è indossare pantaloncini. Ci sono anche thumb-a-fronte-ear come i pazienti drappo un braccio sopra la parte superiore della testa e mediali polpacci o cosce mediale. A mia conoscenza, questi si verificano solo in caso di contatto con la pelle-a-pelle, e solo quando il punto di contatto è piuttosto piccolo. Una grande area di contatto pelle a pelle non generare abbastanza resistenza per la corrente di convertirsi ad una significativa focale hot-spot. 
 
Ora, per evitare che questi due tipi di ustioni, abbiamo bisogno di due risposte completamente diverse (perché le ustioni non sono 1 cosa, sono più le cose). 
 
Per evitare che la bobina di contatto / vicinanza brucia, dobbiamo fare in modo che ci sia un minimo di 1 cm tra il paziente e ogni elemento di trasmissione RF (controllare il manuale dell'operatore del magnete per le raccomandazioni specifiche del produttore). Se un paziente non entra nel foro con 1 centimetro pad, lui o lei non va bene. Scansione con il paziente schiacciato contro la parete del foro è invitante un'ustione sul paziente. 
 
Per evitare che i grosso calibro ustioni anello del corpo, la chiave è il posizionamento. Se il paziente è in un camice, hai un sacco di contatto pelle a pelle tra le gambe. Prendete un asciugamano, piegare a metà lungo l'asse maggiore, e mettere quel asciugamano piegato tra le gambe del paziente. Un paziente in abiti civili, assicurarsi che nessun contatto mano-a-coscia è possibile. Per i pazienti in una posizione di Superman (modificato-), assicurarsi che non drappo il braccio intorno e sopra la parte superiore della testa. 
 
Una delle cose fondamentali su entrambi questi tipi di masterizzazione è sapere che non si può contare sul paziente per avvertire che stanno essendo riscaldata. Si ritiene che l'ustione, per ciascuno di questi due tipi, si verifica nello strato di grasso sotto la pelle ... * dove non ci sono recettori del dolore *. Questi pazienti non possono sapere per minuti, a volte ore dopo l'esame di risonanza magnetica, che sono stati bruciati. 
 
Questo è importante ... non credo che perché hai dato poi la palla di compressione che hai - in qualsiasi modo - li proteggeva da ottenere uno di questi tipi di ustioni. C'è caso dopo caso, dopo il caso dei pazienti scoprendo le loro scottature molto tempo dopo la sequenza è stata fatta. Questo è un infortunio che è di circa 100% prevenibile, ma deve essere fatto attraverso il posizionamento del paziente, il riempimento e isolante, e deve essere fatto prima dell'inizio della rappresentazione. 
 
Spero che questo aiuta.
 
 
Heating in MR actually isn't *a* thing... it's three things. There is heating that is the result of local resistance to induced current flow in large-caliber body loops. There is heating due to focal RF effects (proximity or contact with a transmitting RF coil element). Both of these heating concerns exist without any retained metal (though retained metal *could* increase risks for either). 

The third - the one you're asking about - is retained metal that acts like an RF antennae, collects RF energy and, having nothing else to do with it, converts it to significant quantities of heat.

The most severe risk of heating occurs when an electrical conductor is 1/4 of the RF wavelength. That critical length is (this is from memory, people, so if someone has a link to a reference, that'd be welcome) approximately 25 cm at 1.5T and 12.5 cm at 3.0T.

As you get further from these critical lengths, the risk of RF 'antennae action' drops.

So, in the X-ray that we saw, none of the foreign bodies appeared to be over a cm in any dimension. At 3.0T this means that those objects were more than 10-times too small to be in the heating 'sweet spot'.

It's not that a conductor needs to be precisely the 'magic length' to experience heating, so if we were in the neighborhood of 10, or 15 cm (at 3.0T), there would be justifiable cause for caution about proceeding under those conditions.


The simpler of the two is focal RF, so we'll start there. If you're using the body coil to transmit (transmitting from the wall of your bore), there are RF emitters all the way around the patient, pumping out RF energy in a pattern that is designed to be fairly uniform inside the imaging volume for your magnet. As you get closer to the bore walls (within a cm for most manufacturers), there is the risk that you could be right on top of one of the RF transmitters. 

Think of a heat-lamp keeping plates of prepared food warm as an analogy. Where the plates sit 18-inches below the row of lights, the heat is evenly distributed. If you were to put one plate 1-inch below a heat lamp, while all the others remained at 18-inches below the rest of the row, you intuitively know that there would be a pretty significant difference in heating.

If you look through the FDA's reports of MRI-related burns, you'll see lots of reports of elbows and shoulders. Why these? because they are necessarily the parts of the body closest to the bore wall... particularly if we've shifted the patient to the side to image the contralateral shoulder, for example.

The other heating mechanism is a little bit more strange... the large-caliber body loop. This heating effect isn't from the RF, but rather from the gradient. 

A oscillating magnetic field induces a current in an electrical conductor (Faraday's Law). What are human beings mostly made up of? Water. Water is a pretty damn good conductor of electricity. 

When we put a patient into the MR and start washing them in an oscillating magnetic field (time-varying gradient magnetic field), we induce electrical currents in their body. The strength of the current depends, in part, on how large of a 'racetrack' the current can find. Torsos are great for this, but they're just one large, contiguous volume of electrically conductive material. In order to get a burn we need a point of electrical resistance.

If you ever see 'kissing' points of redness on a patient, you may have identified the resistive point of a current loop. These can be found sometimes thumb-to-thigh for a patient with their arm to their side, if the patient is wearing shorts. There are also thumb-to-opposite-ear as patients drape an arm over the top of their head, and medial calves or medial thighs. To my knowledge, these only occur at skin-to-skin contact, and then only when the point of contact is pretty small. A large area of skin-to-skin contact would not generate enough resistance for the current to get converted to a significant focal hot-spot.

Now, to prevent these two types of burns, we need two entirely different responses (because burns aren't 1 thing, they're multiple things).

To prevent the coil contact / proximity burns, we need to make sure that there is a minimum of 1cm between the patient and any transmitting RF element (check your magnet's operator's manual for your manufacturer's specific recommendations). If a patient doesn't fit in the bore with 1 cm pads, he or she DOES NOT FIT. Scanning with the patient pressed up against the bore wall is inviting a burn on the patient.

To prevent the large-caliber body loop burns, the key is positioning. If your patient is in a hospital gown, you have a lot of skin-to-skin contact between the legs. Take a towel, fold in in half along the long axis, and put that folded towel between the patient's legs. A patient in street clothes, make sure no hand-to-thigh contact is possible. For patients in a (modified-) Superman position, make sure they don't drape the arm around and over the top of the head. 

One of the critical things about both of these burn types is to know that you can't rely on the patient to warn you that they're being heated. It is believed that the burn, for each of these two types, occurs in the fatty layer below the skin... *where there are no pain receptors*. These patients may not know for minutes, sometimes hours after the MRI exam that they were burned. 

This is important... don't think that because you've given then the squeeze ball that you have - in any way - protected them from getting either of these types of burns. There is case, after case, after case, of patients discovering their burns long after the sequence was done. This is an injury that is about 100% preventable, but it has to be done through patient positioning, padding, and insulating, and it has to be done before the imaging begins.

I hope this helps.
 
 
può essere interessante come spunto per dare spiegazioni (semplificando ovviamente) ai Pazienti che chiedono chiarimenti in merito.
 
 


   
Citazione
(@Utente 0403)
Registrato: 1 secondo fa
Post: 0
 

Potresti inserire il link diretto all'articolo?



   
RispondiCitazione
(@Utente 0002)
Registrato: 1 secondo fa
Post: 0
 

non riesco a prendere il link, ma è nel gruppo safety di facebook [profilo social rimosso]

vai un po giu.....



   
RispondiCitazione
Condividi: